Overview EP9432 is an HDMI 1.3 4-IN 2-OUT Repeater with Audio Output which is suitable for Full Matrix applications. The chip supports 4 HDMI input ports (Port 0, Port 1, Port 2 and Port 3), 2 HDMI output ports (Port A and Port B) and Audio Outputs in IIS and SPDIF. The 2 HDMI output ports can be from the same or different sources. The audio output and HDMI output can be selected from the same or different sources. Also, the chip supports 4 ports of on-chip EDID RAM. This will save system cost quite a bit. The chip is compliant with HDMI 1.3a and supports SD/HD Audio and Video in 12-bit Deep Color up to 1080p (225 Mhz TMDS clock). Features On-chip 4-IN 2-OUT HDMI Repeater with Equalizer Support wide Frequency Range: 25MHz - 225MHz TMDS clock On-chip HDMI Receiver and Transmitter core which are compliant with HDMI 1.3a specification and HDMI 1.3c Compliance Test Specification (CTS) On-chip HDCP Engine which supports Repeater and is compliant with HDCP 1.4 specification Supports 4 HDMI input ports (Port 0/1/2/3) with on-chip EDID RAM for each port. Supports 2 HDMI output port (Port A/B) Audio Outputs and HDMI output can be from the same or different sources The 2 HDMI output ports can be from the same or different sources On-chip Audio Decoder which support 8-channel IIS/DSD and SPDIF audio outputs Support Standard Audio, DSD Audio and HD (HBR) Audio Support audio soft mute Support SPDIF Channel Status extraction Register-programmable via slave IIC interface Flexible interrupt registers with interrupt pin Link On and Valid DE Detection Controllable tri-state for Audio output pins Low stand-by current (< 2mA) at power down mode 128-pin LQFP package